Using the theme

To use the theme extract the main downloaded zip file.

After extracting you will find a folder named similar to theme name. That folder is the production ready ( live site ready ) theme. After the required setup you will make a zip of this folder's content ( all files and folders within this folder ) and upload it to your ghost site.

To set up the theme properly with several setting options, please read through the documentation.

Please edit theme files using a proper code editor. There are lots of free and opensource code editor available. You can choose any of those, some popular free code editor Visual Studio Code , Atom

How it works

This theme is made to make documentation site. So the contents are arranged in that manner. When you write content for your site which uses this theme. Keep some point in mind.

  • The tags are used to group the posts in deferent category.
  • Tag names are category name.
  • Tags are ordered in ascending order.
  • Posts in each tag are also ordered in ascending order.
  • An special tag FAQ is used for FAQ posts.

There is a GitHub button in the top navigation bar of this theme. To add your GitHub link to this button please follow the steps below.

  • Go to ghost dashboard and then Settings > design.
  • Under Site-wide section you will see the Url for github button in menu option.
  • Add your github URL there.
  • If you don't want to show that button then keep that field blank.

Normally you do not have to change the copyright text. But if you wan to change or edit the copyright text then follow the following steps.

  • Go to design setting option in your ghost dashboard.
  • Under Site-wide section you will see an option named Copyright text override.
  • Add any text there to override the default copyright text.

Intro title on home page

On the home page of this theme, there is a title text (How can we help you?) at the top. If you want to change that title please follow steps.

  • Go to ghost dashboard and then Settings > design.
  • Under Homepage section you will see the Home intro title option.
  • Replace the default text and add the text you want.
  • Save the settings.

Single post setting options

In this theme there are few option for single post. Go to Site design settings option and then expand Post section.

  • Disable Show share buttons to hide share buttons below the post content.

Disqus shortname option is required for Disqus comment. If you don't want to show comment option then just keep this option text box blank and comment will be disabled.

If you want to show the comment as the demo site and setup the Disqus comment then you need to put your disqus shortname in the above mentioned Disqus shortname option text box.

To setup and get the disqus shortname please follow the steps below.

  • Go to and sign up.
  • After log in go to admin dashboard.
  • Then follow the instruction and add your website there.
  • At the time of adding your site you will get a disqus shortname, copy that.
  • Now put that shortname in the Disqus shortname option text box.

API key for search function

You have to generate an API key to use in the theme. Without the API key the search function will not work. Please follow theses steps.

  • Go to your admin dashboard and visit "Integrations" setting page.
  • Scroll Below and click on the "Add custom integration" button.
  • Give it a name ( anything you want, it does not matter). You can just name it "search"
  • Save that and copy the "Content API key".
  • Now open "api-key.hbs" file which is located in partials folder.
  • Remove everything in that file and paste the API key you have copied from your admin dashboard.
  • Make sure there is no blank space or new line before or after your content API key. Save the file.

API key for search

To add the your social links to the icons in footer, please follow the steps below.

From your ghost dashboard, Go to general setting page and scroll down. In social account option, you can add Facebook and Twitter link there. This Facebook and twitter will be linked with the icons in footer.

There is no option to add other social links directly from dashboard. Following are the steps to add other links.

  • open social-links.hbs file located in partials folder.
  • From line number 10, you can add different social links. Replace the # for each href value with your own profile links.
  • If you want to add other social links or want to remove one, please see all the available icons in "partials > icons" folder.

The code in social-links.hbs file, where you will add your links, will look like below.

<a href="#" title="{{t "Github"}}" rel="noopener" class="tooltip">{{> icons/github}}</a>

Contact call to action box

In this theme there is a contact Call to action above the footer. All the code of this section is in contact-cta.hbs file which is in partials folder.

If you want to change any text or button link of this section do that in that file.


Go to Settings > Membership and create membership tires. Those tires will be shown on the Sign up page as pricing table. after an user sign up with their email.


If you did all the steps which are mentioned above, then you are ready to install the theme.

Ones the necessary configuration is done, make a zip of the modified theme folder.

Now login to your admin area and go to Design. In that page scroll down and you can find "Upload a theme" button. Upload the theme zip which you have created while ago. After finishing upload, activate the theme.

You also have to upload another file routes.yaml in your ghost site to work all the membership related page correctly.

Go to lab page in your dashboard, scroll down and you will see an option for routes. There is a button to upload routes YAML and a link below that button to download the routes.yaml which is being used currently. Download that file and and keep as a backup.

IN the downloaded zip you will find a routes.yaml file which comes with this file and specific for this theme.

Upload that file. Using "upload routes YAML" button.

routs yaml upload

Please note, if you are using self hosted Ghost then may be you need to restart ghost to take effect the new routes file. If you are using Ghost (pro). then you don't need to do anything here.

If you want to install the demo data to make your site as the preview then you can go to your-site-url/ghost/settings/labs/ and then import the digidoc.ghost.demo.json file there. This file is located in demo data folder in main download folder.

Writing posts / articles

This theme groups posts based on tags, and show them in ascending order by published time/date. Which means firstly added post or tag (category on home page, and sidebar links in single post view ) will be shown on top and last post or tag will be shown last.

This ordering and grouping is made for documentation writing workflow and user reading experience.

In blogs, user wants to read the latest post( lastly added post) first when they visit any blog site.

But in case of Documentation, user want to go through beginning to end. Also who write this documentation (in this case you) prefer to write beginning to end.

So to match both case and build better user experience we made the order ascending. But this not means that you can not add any new article in a category later.

At first before writing and publishing any post / article, create the category in order ( top to bottom or start to end ) in which you want to show guide through your user.

To do that just create a tag for each post group (category and tag are same thing here) by visiting your admin dashboard tag page.

After that write posts and add a tag to that post to show that post in that tag group.

Adding images to tags / categories

In home page each category (post group) shows an image. Those are tag images.

Add an image to each tag and those will be shown there. Preferred image size ratio is 1:1 which means square image. In demo we used icons from flaticon (

Ghost support two set of navigation. In this theme the primary navigation will be shown at the top of the page and secondary navigation will be shown in the footer.

To add links to you static page please follow the steps below.

  • Create a new page in your dashboard.
  • Copy the URL for this page from the page settings panel.
  • Go to Design page in your admin dashboard.
  • Add a label and the URL and save it.
  • Now the theme will show newly added link in navigation.

In this theme FAQ is a different collection of posts.

At first add a link in the navigation for FAQ list. The URL should be like this This link will show all the FAQ article list as you have seen in the demo. Maybe you are not seeing any article list on this page in your site at this point. It is because you do not have any FAQ article yet.

To create an FAQ article, just create a post and then add tag FAQ. Save the file and visit the above mentioned link. The new post will be shown there.

Create as many FAQ post as you need Using the FAQ tag.

Change log page

Change log page uses a custom page template. In this custom template a version list will be shown within the sidebar. The version list will be generate automatically based on the content of the page.

To create the changelog page follow the steps below.

  • Create a new page.
  • From the page settings panel, right side of the editor page, select template option "Changelog template"
  • Add your content in the page and publish it.
  • Please remember, make the version titles heading level 2. Otherwise the automated version numbers list will not be generated in the sidebar.
  • Other than that, you can free to format your changelog content as you want. For example In the demo site unordered list being used. and a divider used at the end of each version.

Contact page

In the demo formspree service is being used as contact form.

If you want to get the same look of your form then find . You will find a file name contact-form-code.txt file within the downloaded zip.

Open that text file and copy entire code from there. Now edit your contact page in ghost dashboard. Add an HTML card in your page and add the html code which you have copied from contact-form-code.txt file. Don't forget to change the dummy email address ( with your own email address. Also activate same email address with formspree.

Theme translation

This theme supports translation. Please follow the steps below to translate this theme in your language.

  • Within theme folder, there is a folder named "locales". In that folder by default you will find a file named "en.json". This is the default file for English language and you have to use this file to create your own language file.
  • make a copy of en.json and give a name following this format [language_code].json ( example: for French fr.json for German i.e. Deutsch de.json for Russian ru.json etc. )
  • If you are not sure about what is you language code then you can visit this wiki page and see. Use the two letter (ISO 639-1) code.
  • Now open the newly created <your_language>.json file in text editor. You will see "KEY": "VALUE" format in each line.
  • In English language KEY and VALUE are same. Now you read the left part of the : i.e. KEY part and change the tight part i.e. VALUE part to your own language.
  • After finishing the translation Save the file and upload the theme to your site.
  • Go to your admin area, Visit "General setting" page and change the "publication Language" option. By default there is "en" for English. Add your own language code there in place of "en" and save the settings.
  • Visit your site, If everything goes right, you will see all the theme related text in your site is in your translated language.

If you translate the theme in any language, then please consider to share ( feel free to send me via email ) that language file. I will add that file to the theme, so that it will available to other users.

Theme customization

If you need to add only small CSS then you can add using Ghost's Code Injection feature. In "blog header" box you can add CSS like below example. replace the CSS with your own CSS between the <style> tag.

.header-wrapper .text-logo {
color: #076eff;

Detail customization prerequisite

This theme is built using Gulp to compile JavaScript and CSS. CSS is written in SCSS. So if you want to modify the theme color, styles or appearance or anything you want to customize, before doing that you need to setup development environment setup.

Please follow all the steps below one by one to do it.

You need to have installed node js and gulp installed in your local machine.

  • If you don't have NodeJS installed in your machine then visit and download and install latest LTS version of NodeJS.
  • After installing NodeJS open a command prompt or terminal. Then type node -v. If it shows a version number then NodeJS is installed correctly. Also enter this command npm -v to see npm ( comes with node js) is installed properly.
  • After installing node js you need to install Gulp CLI globally in your machine. So in your terminal or command prompt enter this command. npm install gulp-cli -g. It may take some time, it will install Gulp CLI globally in your machine. Now you have done the environment setup.
  • At this point go to the development theme folder. In downloaded zip there is a folder named "development". Within that folder you will see a folder named as the theme name. Enter in that folder and run command prompt / terminal here. Or you can navigate to this folder within already running terminal.
  • Now enter command npm install. It may take some time. It will install all the development dependency within the project. It may show some warning, don't worry those are OK.
  • At this time you are ready to modify theme, Run one more command gulp in the terminal. It will initially compile all files and star to watch file changes. Keep the terminal open and start customizing the theme.

How to change color or CSS

If you just want to change the accent color for yours site you can directly do that from the Ghost dashboard.

  • Go to Settings > Branding in your dashboard and then change the accent color there.
  • Save the settings and your selected color will be reflect in your site.

If you want to modify other colors or any other CSS please continue reading this section.

In the theme folder you will find "assets > scss" folder which contains all the theme styles written in SCSS.

To change any style / css you need to modify here. In SCSS folder you will find a folder named "components" which contains a bunch of .scss files which are part of the whole theme's style. and all those files are imported in a specific order in "screen.scss" file located in "scss" folder root outside of "components" folder. please don't edit that file.

To change the Theme color please follow the steps below.

  • Open the _color-and-font.scss file in your code editor.
  • Now you have to change the color hexcode (#xxxxxx) in this file and save the file.
  • If you have followed the above section of instruction ( Detail customization prerequisite), and already running terminal with the gulp command then the file changes will be detected and if there is no error in your file then it will be automatically compiled.

The _color-and-font.scss file looks like below.


$font-family: 'Lato', sans-serif;

$theme: (
body-bg: #ffffff,
theme-color: var(--ghost-accent-color), //#4183f2
theme-color-lighten-10: #548ff3,
light-bg-color: #F5F8FC,
text-color-normal: #505763,
text-color-dark: #333840,
text-color-light: #939DAD,
border-color: #E8E9EB,
shadow: 0px 5px 25px 0px rgba(0,0,0, 0.1),
code-bg: #1d2635,
code-header: #060d18,
success: #0ca910,
error: #f0134d,

$black: #000;
$white: #fff;

:root {
@each $name, $value in $theme {
--#{$name}: #{$value};

After modifying the theme CSS when you are done and want to install the final theme in your live site, do the following.

  • Go to running terminal ( terminal is navigated to development theme folder and running gulp command to watch the file changes )
  • Press Ctrl + C or Cmd + C in your keyboard to end the running task.
  • After ending running task enter this command, gulp build. This command will build the production ready ( live site ready ) theme package within a folder named "build".
  • After doing the gulp build if you need you can configure the theme options ( such as disqus shortname, social links etc. ) then use this command gulp zip. It will make a folder named "dist" and make a zip of the contents of "build" folder within "dist" folder.
  • Now you can upload this newly created zip in your ghost admin panel.


V 3.0.0 - May 31, 2022

  • Removed deprecated helper.
  • Modified pricing table to support pricing tires with newly released helpers.
  • Added new content-cta to support tire membership.
  • Updated minimum required Ghost version to 5.0.0.
  • updated translation file.

V 2.1.0 -February 04, 2022

  • Added support for all new cards available in the editor.
  • Added various custom settings so that those can be changed without editing theme files.
  • Added support for the accent color changing from design setting.
  • Updated dependency packages.
  • Fixed TOC and previous next link.

V 2.0.1 -March 18, 2021

  • Fixed image being stretched in post content.

V 2.0.0 -March 18, 2021

  • Updated all development dependency in the package.
  • Updated Ghost engines and API to v4
  • Replaced deprecated @site.lang with new @site.locale
  • Removed hardcoded $ symbol in pricing table now shows currency symbol from payments setting.
  • Removed @lab.members condition checking members are always enabled in Ghost 4.0.
  • updated single post view for properly showing the content preview above the subscription CTA.

V 1.3.0 - October 08, 2020

  • Fixed breadcrumb on FAQ page showing twice.
  • Removed Fuse Js and added searchinGhost plugin to improve search functionality.
  • Adder loading indication in membership related buttons.
  • Added 3 new notifications.
  • Updated translation file.

V 1.2.2 - April 27, 2020

  • Fixed table of content always visible, it should not be visible when there is no heading.

V 1.2.1 - March 12, 2020

  • Improved search result click UX.

V 1.2.0 - February 18, 2020

  • Added table of contents in single post view.
  • Added Disqus comment lazy loading.

V 1.1.0 - February 16, 2020

  • Added full membership feature

V 1.0.0 - February 15, 2020

  • Initial release